Vivo Y20 PD2034F Flash File Tested (Stock ROM)

Also Read

Vivo Y20 PD2034F Flash File Tested Can be Used to Fix Hang On Logo, BootLoop issues, Dead Issues, Automatically Fastboot Mode And Recovery Mode, And Other Software Issues. Always Use the Latest Version of Flash File To Flashing Vivo Y20 And Read All Flashing Instructions Before Flashing The Device Phone. Download the Full Tested Flash File, Flashing Tool, And Drivers' by Link Given Below Check Out Now.

Download Vivo Y20 PD2034F Tested Flash File Firmware:

Pre Requisites Before Flashing Vivo Y20 PD2034F

Charge the battery to 70% before using it.

You must have a Vivo USB OG Cable.

QPST Tool for PC download and installation (Recommended: QCfire, Unlocktool, EMT Tool, MRT) Then, install them on your computer.

Flashing the Vivo Y20 PD2034F:

The following tool is advised for flashing this device: Miracle, QCfire, Unlocktool, EMT tool, MRT

How To Flashing Vivo Y20

1. Install the Qualcomm driver on your PC after downloading it. Skip this step if your PC already has Qualcomm drivers installed.
2. Obtain and extract the Flash file.
3. Install, download, and use the QPST Flash Tool.
4. By shorting EDL points, connect the phone to EDL mode.
5. Port Add in QPST Tool
6. Choose the raw program unsparse.xml from the stock ROM folder by clicking on the Load XML button.
7. When you choose Load Patch, choose patch0.xml from the stock ROM folder.
8. Click the Download button, then wait for the flash to complete.

File information

• PD2034F_EX_A_1.70.19_vivo_qcom
• QPST Flashing Tool
• Vivo Y20 USB Driver

Note: Download the driver from the link above and install it on your computer if your device is having trouble connecting to it.